Description

Indicative glass size: drill 20mm holes in the glass when ordering. Always place two brackets on top of each other. The minimum distance from the lower hole to the glass edges is 100mm and the maximum distance is 300mm. Minimum distance between overlapping fasteners 150mm. There must be at least 4 brackets per glass, but for long glasses the horizontal distance between brackets can be up to 800mm. The minimum distance between the holes of the point fixings and the edge of the concrete is 100mm.

With point fixings, always use as handrails glass of a thickness appropriate to the width and height of the glass.
tempered+laminated glass
, thickness from 8+8mm (16,76mm) (1kN private filling Hmax 1100mm). If the glass railing is at floor/ground level and there is no risk of spillage below ground level, you can also use tempered glass only.

Remember to take building regulations into account when sizing the glass thickness and width!