Valitse kuviolasi:	4mm Flutes Raitalasi
Choose shape:	Rectangle
Choose edge grinding:	Only cutting, edges remain sharp from the cut
Is the glass to be tempered safety glass? (Tempered glass)	Yes, tempered glassNo, regular glass
Tempered glass mark on the glass	YesNo According to the EuropeanNorm 12150-1 standard for tempered glass, there must be a tempering mark on the glass. In some cases, such as furniture glass, the mark can be visually dominant, so the customer can choose to leave the mark off the glass at their own responsibility.
Coordinates Bottom left corner (X,Y) mm
Coordinates Top left corner (X,Y) mm
Coordinates Top right corner (X,Y) mm
Coordinates Bottom right corner (X,Y) mm
Webshop product code
The glass needs holes	No1234567891011121314151617181920
Hole diameter and position in the format: diameter,x,y (mm)	For example, for a 26mm hole 250mm from the left edge and 200mm from the bottom edge, write: 26,250,200
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Hole diameter and position in the format: diameter,x,y (mm)
Width (millimeters)
Height (millimeters)
Height 2 (millimeters)
Diameter (millimeters)
Size of corner rounding, bottom left corner (radius r in millimeters)	Käytä liukusäädintä tai kirjoita kulmapyöristyksen koko suoraan kenttään
Size of corner rounding, top left corner (radius r in millimeters)
Size of corner rounding, top right corner (radius r in millimeters)
Size of corner rounding, bottom right corner (radius r in millimeters)

• Ostaessasi enemmän kerralla, laskemme määräalennuksen automaattisesti täällä näkyvään hintaan kappalemäärän mukaan.
• Mikäli ostat useita eri, tai erikokoisia tuotteita, lisää tuotteet ensin ostoskoriin ja saat kokonaistarjouksen ostoskorin lopputiedoissa!

Yhteenveto valitsemillasi lasitiedoilla

Additional information:	Paino on noin 8.1 kg / kpl ***Huom! Kuvion kulkusuunta on korkeusmitan suuntainen, tarkista että Leveys ja Korkeus -mitat ovat oikeinpäin ***
Production time:	The product will be ready to ship approximately from January 27th, 2025 to January 29th, 2025.
Quantity discount:	-
Measurement drawing:

Vinkki: voit tilata lasit myös laskulle, jolloin saat tilaushetkestä maksuaikaa 45 päivää eikä tilausta tarvitse maksaa etukäteen! Se on helppoa ja turvallista - valitset vain kassalla maksutavaksi: "Lasku/Osalasku".