Glass Point Fixing, Ø50 mm, M10, Flat, MOD 0747, 316 - Base plate thickness 40mm
Product Description
High-quality and tested Q-Railing balustrade glass point fixing, model M0747. Suitable for glass thicknesses 8-17.52mm.
Usage Instructions
Recommended glass dimensions: drill 20mm holes in the glass when ordering. Always place two fixings vertically aligned. Minimum distance of the lower hole from glass edges 100mm and maximum 300mm. Minimum distance between vertically aligned fixings 250mm. Each glass panel must have at least 4 fixings, but in long panels the horizontal distance between fixings can be maximum 800mm. Minimum distance of fixing holes from concrete edge 100mm. Always use tempered+laminated glass of appropriate thickness relative to glass width and height with point fixings, thickness starting from 8+8mm (16.76mm) (1kN private use Hmax 1100mm). If the glass balustrade is at floor/ground level with no risk of falling through, tempered glass alone may be used. Remember to take building regulations into account when dimensioning glass thickness and width!
Order conveniently with your glass order
This accessory can be added directly to your glass order - everything arrives in the same delivery, saving you shipping costs and time. Simply choose your glass category below and add this accessory to your order during the glass ordering process.
